DC13 – 253

Highly active acidic cleaner for brick, tile and concrete surfaces. Quickly removes cement and mortar deposits from new brick.

Description

CONCENTRATED ACIDIC CLEANER

Highly active acidic cleaner for brick, tile and concrete surfaces. Quickly removes cement and mortar deposits from new brick. Dissolves mortar smears and construction dirt from masonry leaving the surface clean and uniform with no burning or streaking.

  • Quick acting
  • High dilution rate
  • Removes mortar and concrete smears
  • Good rust remover
  • Removes lime scale
  • Will not attack glass
  • Good concrete and paver cleaner

Specification

Appearance                  thin, mobile liquid
pH                                   0.5 to 1.5
SG                                   1.12 to 1.16

Dilution

May be used neat or with up to 25% v/v (1:3 volumes water)
Coverage is between 10 and 20 sq metres per litre depending on substrate.

Method

Pre-wet surface to be cleaned with water before use. Apply neat or dilute solution with brush or spray and scrub with a brick cleaning brush. Leave to dwell for 3 to 5 minutes and agitate again. Rinse with high or low pressure water. High pressure rinse will give much better results.

When using indoors ensure adequate ventilation. If pressure rinsing is not possible use a sponge or soft fibred brush to thoroughly rinse with clean water.

Contact me about this product


Download PDF for 253