Transclean®2000 – 668

Transclean 2000 is a highly concentrated, highly alkaline detergent cleaner formulated to remove traffic film, brake dust, dirt, grease and other similar soil from the bodywork all road vehicles.

Description

TRAFFIC FILM REMOVER

A highly efficient, alkaline, traffic film and atmospheric pollutant remover for use on road vehicles, buildings, masonry. Removes grease and oil, ideal for use as a pre-wash before using acid cleaners on brick, concrete and masonry. Uses biodegradable surfactants and contains an antistatic agent that leaves surfaces looking bright and clean. Free rinsing and concentrated it is economical and pleasant to use. It is highly effective for use in pressure washers, automatic brush washers and for manual exterior cleaning.

  • High dilution rates (0.5% for normal soiling) very economical
  • Highly efficient, quick acting
  • Moderate foaming – quick and easy rinsing
  • Sequestrants control lime scale and iron stains
  • Anti-static agent to leave sheen and reduce dirt build-up
  • Uses biodegradable raw materials
  • Does not contain NTA, EDTA or HEDTA

Specification

Appearance                  Clear, mobile liquid
Colour                            Light brown
Odour                             Eucalyptus
S.G.                                1.04
pH                                  13.0 to 14.0
Surfactant Type           Non-ionic, cationic, amphoteric
Builders                        Organic complexing agents

Dilution and method

For light soil use at 0.5% (1:200), normal soil, 1% (1:100), heavy soil 2% (1:50).

Automatic Brush Wash
Ensure that the dosing pump has been calibrated for dilution at the appropriate rate. Carry out cleaning as specified by the brush wash manufacturer.

Pressure Washer
Using a low pressure, apply the appropriate dilution. Start from the lower sections and work up towards the roof. If necessary, agitate the surface with a soft brush to loosen tenacious soiling matter. Rinse off using a high pressure working down from the roof.

By Hand
Dilute to the appropriate level. Apply the diluted product with a soft brush, start from the lower sections and work up. Let the solution dwell for a few minutes then agitate the surface. Work up systematically from the lower sections. Rinse off with clean water, working from above down towards the lower sections.

Contact me about this product


Download PDF for Transclean-2000-code-668