Description

CONCENTRATED FUME-FREE ACIDIC PH CLEANER

An advanced formulation that is a an effective alternative to acids for cleaning brick, tiles and concrete. Quickly removes cement and mortar deposits from new brick. Quick-acting, non-fuming and more effective than phosphoric and aluminium chloride based products. It is safe for use on and around metal surfaces indoors or out.

• Quick acting
• Non-fuming, low odour
• Replaces traditional acid cleaners
• Can be used indoors
• Removes mortar and concrete smears
• Good rust remover
• Removes lime scale
• Will not attack glass
• Good concrete and paver cleaner
• May be used on metal surfaces

Specification

Appearance                  thin, mobile liquid
pH                                   0.5 to 1.5
SG                                  1.13 to 1.15
Solids                             42 to 44 %

Dilutions

May be used neat or with up to 25% v/v (1:3 volumes water)

Method

Pre-wet surface to be cleaned with water before use. Apply neat or dilute solution with brush or spray and scrub with a brick cleaning brush. Leave to dwell for 3 to 5 minutes and agitate again. Rinse with high or low pressure water. High pressure rinse will give much better results. When using indoors ensure adequate ventilation. If pressure rinsing is not possible use a sponge or soft fibred brush to thoroughly rinse with clean water.