Deepstrip – 86


Thickened paint stripper based on benzyl alcohol and water that will efficiently remove many layers of paint. It will cling to vertical and overhead surfaces and is effective on most paints and power coatings. The softened coating can be removed using high pressure water or by brushing whilst rinsing with low pressure water as the product rinses well.

  • Penetrates many layers of paint
  • Strips most generally used coatings
  • Can be left for extended dwell times
  • Clings to vertical and overhead surfaces
  • Rinses well with water
  • Remains wet a long time
  • Use on brick, masonry, metal surfaces
  • Easy to use
  • Free of methylene chloride


Appearance            Thick opaque emulsion
Colour                      water white
Viscosity                 15,000 cps
S.G.                          1.00 to 1.03


Use neat, no need to dilute.
2 to 4 m² per litre


Read MSDS before use.
Do not use in a confined space. Protect people, surrounding areas, plastic and paint surfaces and passing vehicles from splashing or wind drift. Mask all sensitive areas with tape and polythene sheeting.
Remove loose soil and coating with a brush or scraper. Apply a thick coating by solvent resistant brush or roller to a dry surface. Work from bottom to the top. Allow to dwell for from 30 minutes to 24 hours or until the coating lifts and blisters; do not allow to dry.Improved results can be had by covering the treated surface with a plastic film . Rinse using a pressure washer or low pressure water with brushing. If preferred removed the softened paint with a spatula and rinse with water. Wash with an appropriate detergent. When removing acrylic seal or paint from plastic flooring check on a small area first to make sure the floor is not damaged.

Contact me about this product

Download PDF for 86