Lift It Gel – 667

GEL CHEWING GUM REMOVER

Quickly and effectively removes fresh and ingrained chewing gum, stickers and rubber scuff marks from both hard and soft surfaces, carpets, upholstery, clothes.

  • Low evaporation rate
  • Very quick acting works in 1 minute
  • Removes rather than dissolves – leaves no sticky residue
  • Low odour – increased operator comfort
  • Uses biodegradable raw materials
  • Does not use hydrocarbon or chlorinated solvents
  • Suitable for use on most surfaces
  • Gel formulation

Specification

Colour                Yellow
Odour                Characteristic
S.G.                    1.06
Viscosity           4,000cps

Method

Use neat no need to dilute

Hard Surfaces
Apply the remover over the gum. Allow it to dwell for 5 minutes. Remove the chewing gum with a plastic bladed scraper or by gently agitating the effected area with a non abrasive pad. Wipe off any residue with a clean damp cloth then rinse. For best results, wash with a mild detergent.

Soft Surfaces
Prick the surface of the chewing gum. Apply the remover over the gum. Allow it to dwell for 1 to 5 minutes. Remove the chewing gum with a plastic bladed scraper, a blunt knife or by gently agitating the effected area with a non abrasive pad. Wipe off any residue with a clean damp cloth then rinse. For best results, wash with a mild detergent.

Removing Rubber Scuff Marks
Moisten a clean cloth with the remover. Rub the mark until removed. Wipe off any residue with a clean damp cloth then rinse. For best results, wash with a mild detergent.

Cautionary Notes
When removing chewing gum from plastic or painted surfaces, always check for surface compatibility.
When removing chewing gum from carpets or foam-backed surfaces, do not over-apply as it could cause the foam to swell. When removing chewing gum from carpet or carpet tiles that are glued to the floor, do not over-wet as it could soften the adhesive.

Contact me about this product


Download PDF for Lift-It-Gel-code-667