Description
ADVANCED FLOOR POLISH STRIPPING SYSTEM
Efficiently and quickly strips metallized and non-metallized as well as those that are zinc and phosphate-free emulsion floor polishes. Alkali and ammonia free, the hazard is low and there are no unpleasant smell or fumes.
- Can be used at a high dilution
- Neutral pH
- Ammonia free – low odour
- Pleasant to use
- Efficient
- Quick acting
- Removes both metallized and non-metallized polish
- Economical in use
Specification
Appearance Clear Mobile Liquid
Colour water white to pale straw
Odour Mild
pH (in water) Neutral
SG 0.98 to 1.00
Dilutions
Old and thick films of many coats 50:50 in water (50%)
Normal routine stripping up to 1.33 (3%)
Method
Stripping. Apply the appropriate dilution to the floor with a mop. Do not over-wet but apply enough to soften the polish film. Leave for 5 to 10 minutes. Do not allow to dry. Apply more solution if necessary. Scour with a standard speed floor machine fitted with a black stripping pad; use a hand pad for corners and edges. Pick up the slurry with a wet-pick-up vacuum cleaner or mop but by far the best results are achieved using a wet pick-up vacuum.
Reapply stripping solution to areas that have not been completely stripped. Rinse well with clean water and pick up rinse water as above. Rinse again and allow floor to dry before applying emulsion polish or emulsion seal.