EXTERIOR CLEANER FOR MASS TRANSIT AND TRANSPORT
New technology has been used to create a high performance, neutral pH cleaner that imparts a sheen to paint and glass that both reduces spotting and helps to prevent re-soiling. It can be used both in automatic brush washes and manually. Removes traffic film, brake dust, dirt, grease and other similar soil from the body work of rail carriages, buses and traction units.
- Leaves paint and glass gleaming
- Rinse water sheets no streaks
- Spotting reduced
- Surfaces stay clean longer
- Helps prevent re-soiling
- Increases ambience scores
- No cationic surfactant
- Economical in use
- Works in hard or soft water
- High dilution
- Exceptional resistance to corrosion
Appearance Thin mobile liquid
pH 8.0 to 9.0
Solids 8 to 10%
Surfactant Type Non-ionic, anionic
Builders Organic complexones
For light soiling, 0.5% (1:200).
For normal soiling, 1% (1:100).
For heavy soiling 2% (1:50)
Method of use
Automatic Brush Wash
Ensure that the dosing pump has been calibrated for dilution at the appropriate rate and that the equipment in good order. Carry out cleaning as specified by the brush wash manufacturer.
Using a low pressure, apply the appropriate dilution. Start from the lower sections of the carriage and work up towards the roof. If necessary, agitate the surface with a soft brush to loosen tenacious soiling matter. Rinse off using a high pressure working down from the roof.
Dilute to the appropriate level. Apply the diluted product with a soft brush, start from the lower sections of the carriage and work up towards the roof. Let the solution dwell for a few minutes then agitate the surface, work systematically from the lower sections up towards the roof. Rinse off with clean water, working from the roof down towards the lower sections.