TRAFFIC FILM REMOVER
A highly efficient, alkaline, traffic film and atmospheric pollutant remover for use on road vehicles, buildings, masonry. Removes grease and oil, ideal for use as a pre-wash before using acid cleaners on brick, concrete and masonry. Uses biodegradable surfactants and contains an antistatic agent that leaves surfaces looking bright and clean. Free rinsing and concentrated it is economical and pleasant to use. It is highly effective for use in pressure washers, automatic brush washers and for manual exterior cleaning.
- High dilution rates (0.5% for normal soiling) very economical
- Highly efficient, quick acting
- Moderate foaming – quick and easy rinsing
- Sequestrants control lime scale and iron stains
- Anti-static agent to leave sheen and reduce dirt build-up
- Uses biodegradable raw materials
- Does not contain NTA, EDTA or HEDTA
Appearance Clear, mobile liquid
Colour Light brown
pH 13.0 to 14.0
Surfactant Type Non-ionic, cationic, amphoteric
Builders Organic complexing agents
Dilution and method
For light soil use at 0.5% (1:200), normal soil, 1% (1:100), heavy soil 2% (1:50).
Automatic Brush Wash
Ensure that the dosing pump has been calibrated for dilution at the appropriate rate. Carry out cleaning as specified by the brush wash manufacturer.
Using a low pressure, apply the appropriate dilution. Start from the lower sections and work up towards the roof. If necessary, agitate the surface with a soft brush to loosen tenacious soiling matter. Rinse off using a high pressure working down from the roof.
Dilute to the appropriate level. Apply the diluted product with a soft brush, start from the lower sections and work up. Let the solution dwell for a few minutes then agitate the surface. Work up systematically from the lower sections. Rinse off with clean water, working from above down towards the lower sections.