Description

TRAFFIC FILM REMOVER

High performance caustic detergent cleaner formulated to remove traffic film, brake dust, dirt, grease and other similar soil from the bodywork of all road vehicles. It is highly effective for use in pressure washers, automatic brush washes and for manual exterior cleaning.

• High dilution rates (1% for normal soiling) very economical
• Moderate foaming – quick and easy rinsing
• Sequestrants control lime scale and iron stains
• Anti-static agent to leave sheen and reduce dirt build-up
• Uses biodegradable raw materials
• Does not contain NTA, EDTA or HEDTA

Specification

Appearance                Clear, mobile liquid
Colour                          Dark red
Odour                           Mild
S.G.                              1.06
pH                                 12.0 to 13.0
Surfactant Type         Non-ionic, cationic, amphoteric
Builders                       Organic complexing agents

Dilution and method

For light soil use at 1.0% (1:100), normal soil, 2% (1:50), heavy soil 5% (1:20).

Automatic Brush Wash
Ensure that the dosing pump has been calibrated for dilution at the appropriate rate. Carry out cleaning as specified by the brush wash manufacturer.

Pressure Washer
Using a low pressure, apply the appropriate dilution. Start from the lower sections and work up towards the roof. If necessary, agitate the surface with a soft brush to loosen tenacious soiling matter. Thoroughly rinse using a high pressure working down from the roof.

By Hand
Dilute to the appropriate level. Apply the diluted product with a soft brush, start from the lower sections and work up. Let the solution dwell for a few minutes then agitate the surface. Work up systematically from the lower sections. Rinse off with plenty of clean water, working from above down towards the lower sections.

NB caution. Thoroughly rinse with clean water after use. As with all highly alkaline products damage can be caused to paint, glass and aluminium.